Listening To A Usb Device - Yamaha TSX-130 Owner's Manual

Desktop audio system
Hide thumbs Also See for TSX-130:
Table of Contents

Advertisement

Available languages

Available languages

LISTENING TO MUSIC

Listening to a USB device

Note
You can remove your USB device whenever you want.
■ Playing back normally
1
Set your USB device into the USB
port.
This unit supports USB mass storage class devices
(e.g., flash memories or portable audio players) using
FAT16 or FAT32 format.
Notes
• Some devices may not work properly even if they meet the
requirements.
• Do not connect devices other than USB mass storage class
devices (such as USB chargers or USB hubs), PCs, card
readers, an external HDD, etc.
• Yamaha will not be held responsible for any damage to or
data loss on the USB device occurring while the device is
connected to this unit.
• Playability of and power supply to all kind of USB devices
are not guaranteed.
2
Select USB.
Playback starts.
Note
The reading time may exceed 30 seconds, depending on the
number of files/folders.
■ Playing back in random sequence/
repeatedly
After the above steps 1 and 2, you can enjoy random and
repeat mode.
Set in the same way as for CDs (☞ P. 12).
13
En
■ Switching the playback information
display
Switch the display in USB playback
mode.
You can change the information display as follows.
Elapsed time of the current track (default setting)
Track name
*
Artist name
*
Album name
*
File name
Back to the default setting
* Only when the selected file has information
y
On MP3/WMA files, refer to "NOTES ON DISCS AND USB
DEVICES" (☞ P. 19).
Press repeatedly.

Advertisement

Table of Contents
loading

Table of Contents