AIR ShuTTeR ADjuSTMeNT (NATuRAL GAS ONLy)
ADjuST The AIR ShuTTeR
The venturi under the burner is equipped with an air shutter. The opening of the venturi has been
set at 3/16" for Natural Gas and fully open for Propane installation at sea level. The burner on
Natural Gas models may be adjusted for high altitude as follows:
To access the air shutter, remove three (3) screws securing burner to engine base and slide burner
to the left or remove from firebox.
•
To increase air mixture, loosen the screw to open the shutter more. This will reduce soot
formation. Figure 43
•
To decrease air mixture, loosen the screw to close the shutter. Flames will be more yellow.
Figure 43
Figure 43 -
Air Shutter Adjustment
20304164
Burner
Pilot Assembly
Venturi
FP2963
venturi
FP2963
Air Shutter
Adjustment
Screw
ICFDV Fireplace Insert
35