Cleaning And Maintenance; Venting System; Cleaning Glass; Pilot And Burner Flames - Monessen Hearth ICFDV30LNTSC Installation And Operating Instructions Manual

Icfdv series direct vent gas fireplace insert

Table of Contents

ICFDV Fireplace Insert

Make sure the gas valve knob is in the "OFF" position. Wait at least five (5) minutes before

start-ing maintenance.

A qualified agency should examine the venting system annually.

Clean the ceramic glass periodically. Condensation will sometimes form on the glass during a

cold startup. This is normal for all gas fireplaces and inserts. This condensation often attracts

dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave

a slight film on the glass. This is a temporary problem.

You should clean the glass after the first two weeks of use. After that, you should clean the

glass no more than two or three times a season. Use a mild glass cleaner to clean the door.

Do not use abrasive cleaners. They will damage the glass surface.

Visually check pilot and burner flames periodically. Refer to Figure 46 for typical burner flame.

Refer to Figure 47 for typical pilot flame.

Figure 46 -

Typical Burner Flame

LG1122

ICFDV log flame

Figure 47 -

Typical Pilot Flame