Changing the channel
for better sound
transmission
If you use multiple wireless systems which
sharing the 2.4 GHz band, such as wireless
LAN or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, the transmission may be
improved by changing the following "RF
SETUP" setting.
AMP
~~/.----f+---i:
(90
(~
MENU
( MENU)
1
Press AMP MENU.
2
Press
+1+
repeatedly to select
"S-AIR", then press
8
or +.
3
Press
+1+
repeatedly to select
"RF SETUP", then press
8
or
+.
4
Press
+1+
repeatedly to select
the setting you want, then
press
8.
• RF AUTO: Normally select this. The
system changes "RF SETUP" to
"RF ON" or "RF OFF" automatically.
• RF ON: The system transmits sound by
searching the better channel for
transmitting.
• RF OFF: The system transmits sound by
fixing the channel for transmitting.
To exit the menu
Press AMP MENU.
Notes
• In most cases. you will not need to change this
setting.
• If "RF SETUP" is set to "RF
OFF'.
transmission
between the S-AIR main unit and S-AIR sub unit
can be performed using one of the following
channels.
- S-AIR ID A: equivalent channel for IEEE
802.11 big channel I
- S-AIR ID B: equivalent channel for IEEE
802. I I big channel 6
- S-AIR 10
C:
equivalent channel for IEEE
802.11 big channel II
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
65
GB
•
en
I
»
-
: :D
o
"C
CD
""
I»
-
c i'
:::J
t/)