Sony STR-DH710 Operating Instructions Manual page 26

Notes on connecting cables
• Use a High Speed HOMI cable. If you use a
Standard HOMI cable, 1080p or Deep Color
(Deep Colour) images may not be displayed
properly.
• Sony recommends that you use an HOMI
authorized cable or Sony HOMI cable.
• We do not recommend using an HOMI-OVI
conversion cable. When you connect an
HOMI-DVI conversion cable to a OVI-O
component, the sound and/or the image may
not be output. Connect other audio cords or
digital connecting cords, then set
"A. ASSIGN" in AUDIO menu (page 81)
when the sound is not output correctly.
Notes on HOMI connections
• An audio signal input to the HOMI IN jack
is output from the SPEAKERS jacks and
HOMI TV OUT jack. It is not output from
any other audio jacks.
• Video signals input to the HOMI IN jack can
only be output from the HOMI TV OUT
jack. The video input signals cannot be
output from the VIDEO OUT jacks or
MONITOR OUT jacks.
• When you want to listen to the sound from
the TV speaker, set "AUDIO.OUT" to
"TV+AMP" in the HOMI menu (page 82).lf
you cannot play back multi channel
software, set to "AMP". However. the sound
will not output from the TV speaker.
• Be sure to turn on the receiver when video
and audio signals of a playback component
are being output to a TV through this
receiver. If you set "PASS.THRU" to
"OFF', video and audio signals will not be
transmitted when the power is set to off.
• DSO signals of Super Audio CO are not
input and output.
• The multi/stereo area audio signals of a
Super Audio CD are not output.
26
GB
• Audio signals (sampling frequency. bit
length, etc.) transmitted from an HDMl jack
may be suppressed by the connected
component. Check the setup of the
connected component if the image is poor or
the sound does not come out of a component
connected via the HOMI cable.
• Sound may be inteITupted when the
sampling frequency, the number of channels
or audio format of audio output signals from
the playback component is switched.
• When the connected component is not
compatible with copyright protection
technology (HOCP), the image and/or the
sound from the HOMl TV OUT jack may be
distorted or may not be output.
In this case, check the specification of the
connected component.
• Set the image resolution of the player to
more than 720p/1080i to enjoy High Bitrate
Audio (OTS-HO Master Audio, Dolby
TrueHO).
• The image resolution of player may need
certain settings be made before you can
enjoy multi channel Linear PCM. Refer to
the operating instructions of the player.
• Not every HOMI component supports all
functions that are defined by the specified
HOMI version. For example, components
that support HOMl, version lA, may not
support Audio Return Channel (ARC).
• Refer to the operating instructions of each
connected component for details.