Sony STR-DH710 Operating Instructions Manual page 8

Indicalorson tile
display
Indicator and explanation
rn
Playback channel indicators
The letters
(L
C.
R, etc.) indicate the channels
being played back. The boxes around the letters
vary to show how the receiver downmixes or
upmixes the source sound (based on the speaker
settings).
SW
lH
RH
l
R
C
Sl
SR
S
SBl
SBR
SB
Subwoofer
Front Left High
Front Right High
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Speaker pattern: 3/0.\
Recording format: 3/2. I
Sound Field: A.F.D. AUTO
~@ (uLFEm
OJ[CJ[RJ
SL SA
Indicator and explanation
[gJ
luLFEm
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.
[]] Input indicators
Light up to indicate the current input.
HOMI
Lights up when
- the receiver recognizes a component
connected via an HDMI IN jack (page 24).
- TV input detected Audio Return Channel
(ARC) signals (page 59).
COAX
Lights up when INPUT MODE is set to
"AUTO" and the source signal is a digital signal
being input through the COAXIAL jack (page
68).
OPT
Lights up when INPUT MODE is set to
"AUTO" and the source signal is a digital signal
being input through the OPTICAL jack (page
68).