Sony STR-DH710 Operating Instructions Manual page 71

Notes
• Set "SB ASGN" to "BI-AMP" before you perform
Auto Calibration.
• If you set "SB ASGN" to .oBI-AMP", the speaker
level and distance settings of the surround back
speakers and front high speakers become invalid,
and those of the front speakers are used,
• If you set "PATTERN" to a setting with surround
back speakers or front high speakers. you cannot
set "SB ASGN" to "BI-AMP",
Using the setting menu
By using the amplifier menus. you can make
various adjustments to customize the receiver.
1
Press AMP MENU.
2
Press
+1+
repeatedly to select
the menu you want, then press
8)or+.
3
Press
+1+
repeatedly to select
the parameter you want to
adjust, then press 8) or +.
4
Press
+1+
repeatedly to select
the setting you want.
The setting is entered automatically.
To return to the previous
display
Press. or RETURN/EXIT
0--',
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear dimmed
on the display, This means that they are either
unavailable or fixed and unchangeable,
71
GB
-
»
Q.
<
Q)
~
(')
(I)
Q.
o
"0
(I)
'"'I
Q)
=:
o
~
en