Enjoying The System's Sound In Another Room - Sony STR-DH710 Operating Instructions Manual

Enjoying the system's
sound in another room
(For the S-AIR receiver only (not
supplied»
You can enjoy the system's sound in another
room by using the S-AIR receiver. The S-AIR
receiver can be placed in another room for
enjoying the system's sound there.
For details of the S-AIR receiver, refer to the
operating instructions supplied with the S-AIR
recelVer.
1
Set the 10 of the S-AIR receiver
to match the 10 of the S-AIR
main unit.
• To set the 10 of the S-AIR main unit,
see "To set the
ID
of the S-AIR main
unit" (page 61).
• To set the 10 of the S-AIR receiver,
refer to the operating instructions
supplied with the S-AIR receiver.
Notes
• When you are using another S-AIR sub unit,
such as a surround amplifier, do not change
the ID of the S-AIR main unit. Set the ID of
the S-AIR receiver to match the ID of the
S-AIR main unit.
• When you pair the S-AIR main unit and
another S-AIR sub unit, such as a surround
amplifier, you also need to pair the S-AIR
main unit and the S-AIR receiver. For details,
see "Pairing the S-AIR main unit with a
specific S-AIR sub unit (Pairing operation)"
(page 62).
2
Press AMP MENU.
Operation
Change the function of the
system.
Share the same operations on the
remote.
~,II,.,
~/~
Press
S-AIR CH
3
Press
+/+
repeatedly to select
"S-AIR", then press ~ or
+.
4
Press
+/+
repeatedly to select
"MODE", then press ~ or
+.
5
Press
+/+
repeatedly to select
the setting you want.
• PARTY: The S-AIR receiver outputs
sound according to the input selected on
the S-AIR main unit.
• SEPARATE: You can select the input
you want for the S-AIR receiver while
the input of the S-AIR main unit remain
unchanged. When at SEPARATE
mode, you can only select "SA-COl
CD", "DMPORT", "FM TUNER",
"AM TUNER" and the input that is
currently selected at the S-AIR main
unit.
Note
When "FM TUNER" or "AM TUNER" is
selected on the S-AfR main unit, you can
only select the same band for the tuner on the
S-AIR receiver. However, you can select
input other than TUNER on the S-AIR
receiver.
6
Adjust the volume on the
S-AIR receiver.
Notes
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
• When the sound is other than 2 channel stereo,
multi channel sound is down mixed to 2 channel.
• Signals with a sampling frequency of more than
96 kHz cannot output to this S-AIR receiver.
To control the system from the
S-AI R receiver
You can control the system from the S-AIR
receiver by using the following buttons.
For details, refer to the operating instructions
of the S-AIR receiver.
I
01
I
,
AMP
c:.o+-+t--
MEN U
( MENU)
C::C
C::L.c:r.c::J
t:D
\:D,
.1+1.1.
64 GB