KTI Networks KFS-2621 User Manual page 33

Configuration
Port No.
Tx Rate
Rx Rate
Speed Base
[Apply]
[Refresh]
[LoadDefault]
Status
Link Speed
Note:
1. Rate value = 0 means full speed for Tx & Rx.
2. Port 1 ~ Port 24 Link speed 10M with high rate base: Valid rate value 1~39
3. Port 25 ~ Port 26 Link speed 10M with high rate base: Valid rate value 1~4
4. Port 25 ~ Port 26 Link speed 100M with high rate base: Valid rate value 1~48
Description
The selected destination ports are forwarded all packets received on the source ports.
Rate value: 0 ~ 255
Rate value: 0 ~ 255
Low – Low rate base
Port 1 ~ Port 26: Port Rate (Bandwidth) = Rate value * 32Kbps
High – High rate base
Port 1 ~ Port 24: Port Rate (Bandwidth) = Rate value * 256Kbps
Port 25 ~ Port 26: Port Rate (Bandwidth) = Rate value * 2048Kbps
Click to apply the configuration change.
Click to refresh the port rate display.
Click to use the default configuration for all ports.
Description
The port link speed: 10Mbps, 100Mbps, 1000Mbps
-33-