Initial Setup; Turning The Tv On For The First Time - Logik L19LDVB11 Instruction Manual

Initial Setup

Turning the TV On for the First Time

1. Connect the mains adapter to the mains adapter socket located
at the rear right bottom side of your TV and then connect to the
mains socket after you have completed all the connections.
2. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
3. In standby mode, press the
side panel of the TV or on the remote control to
turn the TV on. The red LED indicator will turn
blue.
• Only use the included mains adapter. Do not use it
with any other equipment.
• Always disconnect the TV from the mains socket
when not in use for a long period of time.
• The button on the right side panel of the TV or
on the remote control is only used for switching
the TV into standby, it does not disconnect the TV
from the mains power. To completely disconnect
the mains power, please remove the mains
adapter from the mains socket.
4. The first time you turn the TV on, it will go straight into the First
Time Installation menu. Please ensure the aerial is plugged
in and then press the OK button. (If you have already installed
the TV using the Quick Start Guide, please go to the next step
"Selecting the Input Source" on the next page.)
5. Press the
buttons to navigate the menu and change the
settings. Press the OK button to confirm.
OSD Language
Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Country
Select the country where you will operate the TV.
The default country is set as UK.
6. Channel tuning will commence. This operation may take up to 6
minutes. The display will show the progress of the tuning and the
number of channels found.
7. If you want to skip the ATV tuning, press the MENU button to
interrupt the tuning half way. A pop-up screen will be displayed,
press the button to select YES to confirm. You will then go
straight to DTV tuning. You may repeat the above step if you also
want to skip the DTV tuning. An installation reminder will appear
the next time you turn on the TV.
8. After tuning is complete, the channels are arranged in a preset
order. If you wish to skip channels, modify the preset order or
rename channels, select Channel Edit under the Channel menu
(refer to page 21-22 for details).
button on the right
VIDEO L R Y Pb Pr
First Time Installation
Please ensure aerial is plugged in!
Then press OK button.
OSD Language
Cesky English
~
Espanol
Dansk
Deutsch E k
UK Belgium
Australia Bulgaria
Austria Croatia
Channel Tuning
TV : 3 Channel(s)
DTV : 0 Channel(s)
Radio : 0 Channel(s)
Data : 0 Channel(s)
36%...
Please press MENU to skip.
To the mains socket
HDMI2
Mains Adapter
(included)
Magyar Polski
Fran ais
Hrvatski Nederlands Portugues
Italiano Norsk Pycck
OK
Country
Czech France Hungary
Denmark Germany Italy
Finland Greece Luxembourg
OK
668.75MHz (TV)
17
GB