Table of Contents
Advertisement
Initial Setup
Turning the TV On for the First Time
1. Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to
the AERIAL IN socket at the rear side of your TV.
Do not connect the TV to the mains
supply until you have completed all the
connections.
2. Connect the mains adapter to the socket marked
DC IN and plug into the mains socket. Switch on at
the mains socket, after you have completed all the
connections. At this stage, the TV switches to standby
mode. The red LED indicator will illuminate on the
front panel of the TV.
3. In standby mode, press the
control to turn the TV on. The red LED indicator will
turn blue.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The STANDBY button on the front right side panel of the TV or the
switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the
mains power, please remove the mains plug from the mains socket.
4. The first time you turn the TV on, it will go straight into the First Time
Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start
Guide, please skip this section).
5. Press the
displayed on the menu. The default on-screen menu language is
set as English. Press the OK button to confirm.
6. To select the country option press the
button to confirm.
14
button on the remote
buttons to select your desired language to be
OR
RF coaxial cable
(not included)
COAX
Audio Out
buttons. Press the OK
USB
AERIAL IN
HDMI
To the mains
socket
VGA (PC)
VGA (PC)
DC IN
Audio In
SCART
button on the remote control is only used for
Please ensure aerial is plugged in!!
Then press OK button to start
Please select an OSD Language
English
Español
Deutsch
Português
Country
UK
Denmark
Czech
Finland
CI CARD IN
CVBS
R
L
Mini YPbPr
Français
Italiano
France
Germany
Menu
Advertisement
Table of Contents
