Initial Setup; Turning The Tv On For The First Time - Logik L19HED12 Instruction Manual

19” hd ready led tv with dvd player
Table of Contents

Advertisement

Initial Setup

Turning the TV On for the First Time

1. Connect one end of the RF coaxial cable to the
aerial socket on the wall and the other end of the
cable to the RF (75Ω) socket at the rear right side
of your TV.
Do not connect the TV to the mains
supply until you have completed all the
connections.
2. Connect the mains cable to the mains socket after
you have completed all the connections.
3. At this stage, the TV switches to standby mode. The
red LED indicator will illuminate on the front panel of
the TV.
4. In standby mode, press the
panel of the TV or on the remote control to turn the
TV on. The red LED indicator will turn blue.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
button on the right side panel of the TV or on the remote control is only used for switching the TV into
standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please
remove the mains plug from the mains socket.
5. The first time you turn the TV on, it will go straight into the First Time
Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start
Guide, please go to the section "Selecting the Input Source" on the next
page.)
6. Press the
buttons to navigate the menu and change the
settings. Press the OK button to confirm.
OSD Language
Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Country
Select the country where you will operate the TV.
The default country is set as UK.
USB
button on the right side
COMMON INTERFACE (CI)
HDMI2
HDMI1
HEADPHONE
PC AUDIO
Please ensure aerial is plugged in!
Then press OK button.
Cesky
English
Espanol
Dansk
Deutsch
E
UK
Belgium
Australia
Bulgaria
Austria
Croatia
OR
RF coaxial cable
(not included)
PC IN
RF
To the mains
socket
First Time Installation
OSD Language
Magyar
Polski
Fran ais
~
Hrvatski
Nederlands
Portugues
k
Italiano
Norsk
Pycck
OK
Country
Czech
France
Hungary
Denmark
Germany
Italy
Finland
Greece
Luxembourg
OK
17
GB

Advertisement

Table of Contents
loading

Table of Contents