Logik L19HE13N Quick Start Manual

29" HD Ready LED TV
Quick Start Guide
GB
19" / 24" HD LED TV
Thank you
for purchasing your new Logik TV.
Your new TV incorporates the latest technology to enhance your viewing experience. We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful rst time installation.
1 1
Unpacking
Remove all packaging from the TV. Retain the packaging. If
you dispose of it please do so according to any local
regulations.
TV Screw A x 1
TV Stand Support
Screw B x 3
TV Base
Instruction Manual
Remote Control /
Quick Start Guide
AAA Batteries x 2
3 3
Installing the Base Stand
1. Lay the TV down on a at surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed
beneath the screen.
2. To install the TV stand, rst attach the stand support to the TV by using screw A. Align the screw hole then use screw A to x the stand support to the TV.
3. To install the base stand, align the screw hole, then secure with a screw driver (not included) using the 3 screw B provided.
Screw A x 1
L19HE13N
L24HE13N
2 2
Operating Your Remote Control
1. Press and lift the back cover to open the
battery compartment of the remote
control.
2. Insert two AAA size batteries. Close the
battery compartment cover.
Make sure the (+) and ( – ) ends of
the batteries match the (+) and ( – )
ends indicated in the battery
compartment.
screw
TV Front
Base Stand
Front
screw
Screw B x 3
4 4
Connecting the Aerial and the Mains Socket
1. Connect one end of the RF coaxial cable to the aerial socket on the
wall and the other end of the cable to the RF (75 ) socket at the rear
right side of your TV.
Do not connect the TV to the mains supply until you
have completed all the connections.
2. Connect the mains cable to the mains socket after you have
completed all the connections.
3. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
4. In standby mode, press the button on the right side panel of the
TV or on the remote control to turn the TV on. The red LED
indicator will turn blue.
5 5
Turning the TV On for the First Time
First Time Installation
Please ensure aerial is plugged in!
Then press OK button.
1. The rst time you turn the TV on, it will go 4. Press the
straight into First Time Installation menu. DVB-C and then press the OK button to
Press the OK button to start First Time con rm.
Installation menu.
Please select an OSD Language Tune Type
English esky Suomi Germany
Svenska Slovak
Greece
Dansk Norsk
Hungary
OK
2. Press the buttons to select your
4a. If you select DVB-T, press the
desired language to be displayed on the
select DTV / ATV / ATV + DTV. Press the
menu. The default on-screen menu language
button and then press the
is set as English. Press the OK button to
to select the desired country and. Press the
con rm.
OK button to start tuning.
Mode Select
Scan type
Home Mode
Frequency
Shop Mode
Network ID
Symbol(ks/s)
OK
3. Press the buttons to select your desired 4b. If you select DVB-C, the next step is to
mode and then press the OK button. Press the con gure the DVB-C system (Scan type /
button to select Yes to con rm or the Frequency / Network ID / Symbol(ks/s)). Press
button to select No to cancel and return to the the OK button to go to the tune type and
Mode Select menu. add country select menu. This step is the
same as the DVB-T's select the tune type (DTV
/ ATV) process. Press the
select the desired country and then press the
OK button to start tuning.
Well done,
your new TV is now ready to use. You will nd that there are many exciting features available. To get to know all these features, please
take some time to read the instruction manual provided with your TV.`
To mains
2
socket
RF Coxial Cable
(not included)
COMMON INTERFACE (CI)
USB HDMI2 HDMI1(ARC)
HEADPHONE PC AUDIO
Channel Tuning
DVB Select type
DTV : 3 Channel(s)
Radio : 0 Channel(s)
Data : 0 Channel(s)
DVB-T
36% UHF CH
DVB-C
Press [MENU] to skip.
buttons to select DVB-T / 5. Channel tuning will commence. This operation
may take up to 6 minutes. The display will
show the progress of the tuning and the
number of channels found.
Target Region Setting
DTV
During tuning your TV may have received signals
Italy Netherlands
from more than one transmitter. If this has
Ireland Norway
occurred the Target Region Setting screen will be
displayed. This will enable you to select the
Luxembourg Poland
correct regional transmission for the local news
MENU
service that you require.
buttons to
Press the buttons to adjust each option's
setting and then press the OK button to con rm.
buttons
Target Region Setting
1
Country Code
2
Primary Region
DVB-C Scan Menu
3
Secondary Region
Full
4 Tertiary Region
610000
Auto
Auto
OK MENU
This will be shown as GBR for the UK.
1
This will show the regional country (England, Wales,
2
Scotland, NI).
This will allow you to set the region for your local
3
news service on BBC and ITV (London, Beds and
Cambs etc).
4 You may receive signals from more than one
buttons to
transmitter within the Secondary Region, (e.g Beds
and Cambs may have Luton or Sandy Heath).
(QSG-L19_24HE13N-130808V2-1)
1
PC IN RF
(DTV)
GBR
England
London