Logik L26FE12N Quick Start Manual

26" Full HD LED TV
Quick Start Guide
L26FE12N
Thank you
for purchasing your new Logik TV.
Your new TV incorporates the latest technology to enhance your
viewing experience. We would suggest that you allow about 20
mins for initial setup.
Please follow this guide for a successful first time installation.
GB
1 1
Unpacking
Remove all packaging from the TV. Retain the packaging.
If you dispose of it please do so according to any local
regulations.
TV Screw A x 2
TV Stand Support Screw B x 3
TV Base Instruction Manual
Quick Start Guide
Remote Control /
AAA Batteries x 2
3 3
Installing the Base Stand
1. Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is
placed beneath the screen.
2. To install the TV stand, first attach the stand support to the TV by using screw A. Align the screw holes then use 2 screw A to fix the stand support to the TV.
3. To install the base stand, align the screw holes, then secure with a screw driver (not included) using the 3 screw B provided.
Screw A x 2
(P.N.: 209100430B1)
2 2
Operating Your Remote Control
1. Press and lift the back cover to open the
battery compartment of the remote
control.
2. Insert two AAA size batteries. Close the
battery compartment cover.
Make sure the (+) and ( – ) ends
of the batteries match the (+)
and ( – ) ends indicated in the
battery compartment.
screw
TV Front
screw
Base Stand
Front
Screw B x 3
(P.N.: 209060410B1)
4 4
Connecting the Aerial
OR
RF Coxial Cable
(not included)
COMMON INTERFACE (CI)
USB HDMI2 HDMI1 PC IN
HEADPHONE PC AUDIO
Connect one end of the RF coaxial cable to the aerial socket on the
wall and the other end of the cable to the RF (75Ω) socket at the rear
right side of your TV.
Do not connect the TV to the mains supply until you
have completed all the connections.
6 6
Turning the TV On for the First Time
The first time you turn the TV on, it will go straight into First Time Installation menu.
1. Press the OK button to start
First Time Installation
First Time Installation
Please ensure aerial is plugged in!
menu.
Then press OK button.
2. Press the
OSD Language
to select your desired
language to be displayed
Cesky English Fran ais Magyar Polski
on the menu. The default
Espanol ~
Dansk Hrvatski Nederlands Portugues
on-screen menu language
Deutsch E k Italiano Norsk Pycck
is set as English. Press the
OK OK button to confirm.
3. Press the buttons to
DVB SELECT TYPE select DVB-T / DVB-C and
then press the OK button to
confirm.
DVB-T
DVB-C
7 7
Target Region Descriptor
This will be shown as GBR for the UK.
During tuning your TV may have received signals
This will show the regional country
from more than one transmitter. If this has occurred
the Target Region Descriptor screen will be
displayed. This will enable you to select the correct
This will allow you to set the region for
regional transmission for the local news service that
your local news service on BBC and
you require.
ITV (London, Beds and Cambs etc).
Press the buttons to adjust each option's setting
You may receive signals from more than
and then press the OK button to confirm.
one transmitter within the Secondary
Region, (e.g Beds and Cambs may have
Well done,
your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these
features, please take some time to read the instruction manual provided with your TV.
5 5
Connecting to the Mains Socket
RF
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
3. In standby mode, press the button on the right side panel of the
TV or on the remote control to turn the TV on. The red LED
indicator will turn blue.
3a. If you select DVB-T, press the buttons
Tune Type DTV+ATV
to select the desired country and then
press the OK button to start tuning.
UK Belgium Czech
Australia Bulgaria Denmark
3b. If you select DVB-C, the next step is to
Austria Croatia Finland
configure the DVB-C system (Scan
type / Frequency / Network ID /
MENU
Symbol(ks/s). Press the OK button to
buttons DVB-C Scan Menu go to the tune type and add country
select menu. This step is the same as
Scan type Full
the DVB-T's select the tune type (DTV
Frequency
610000
/ ATV) process. Press the
Auto
Network ID
buttons to select the desired country
and then press the OK button to start
Symbol(ks/s) Auto
OK MENU tuning.
4. Channel tuning will commence. This
Channel Tuning
operation may take up to 6 minutes.
The display will show the progress of
TV : 3 Channel(s)
DTV : 0 Channel(s)
the tuning and the number of channels
Radio : 0 Channel(s)
Data : 0 Channel(s) found.
36%... 668.75MHz (TV)
Please press MENU to skip.
Target Region Setting
Country Code
(England, Wales, Scotland, NI).
Primary Region
Secondary Region
Tertiary Region
Luton or Sandy Heath).
To mains
socket
GBR
England
London
(P.N.: 4033C266103)