Loma IQ³+ User Manual Supplement page 5

EC DECLARATION OF INCORPORATION / CONFORMITY
We hereby declare that the following machinery is intended to be incorporated into other
machinery and must not be put into service until the relevant machinery into which it is
to be incorporated has been declared in conformity with the essential health and safety
requirements of the Machinery Directive 98/37/EC.
We hereby declare that the following machinery complies with the essential health and
safety requirements of the Machinery Directive 98/37/EC and the protection requirements
of the Elekctromagnetic Compability Directive 89/336/EEC, 91/263/EEC and 92/31/EEC
and the Equipment for Use in Potentially Explosive Atmospheres Directive 94/9/EC.
Machine Description: Inspection machine for the analysis and classifi cation of food
and non-food related products by non-destructive means.
Machine Type: Standardised Conveyor and Metal Detector
Serial Number:
This machinery has been designed and manufactured in accordance with the following
transposed harmonised European standards
EN12100 parts 1 and 2 : 2003, S afety of Machinery - Basic concepts, general principles for design.
EN294 : 1992, Safety of Machinery - Safety distances to prevent danger zones being reached by the upper limbs.
EN349 : 1993, Safety of Machinery - Minimum gaps to avoid crushing of parts of the human body.
EN418 : 1992. Safety of Machinery - Emergency stop equipment, functional aspects - Principles for design.
EN60204 part 1 : 1998, Safety of Machinery - Electrical equipment of machines - Specifi cation for general requirements
EN61000-6-2 : 2001, Generic Immunity Standard – Industrial environment.
sion Standard – Industrial environment.
EN61000-6-4 : 2001, Generic Emis
A technical construction fi le for this machine is retained at the following address:
Spectrum Inspection Systems Ltd., Southwood, Farnborough, Hampshire, GU14 0NY England.
Signed:
Name: Mike Robinson.
Being the responsible person appointed by the manufacturer or nominated representative of the
manufacturer established in the EC, and employed by
Spectrum Inspection Systems Ltd., Southwood, Farnborough, Hampshire, GU14 0NY England.
or
Date: 03/08/07
Position: Group Operations Director.
5
IQ³ + User Guide
Supplement