Mimic Screen - Loma IQ³+ User Manual Supplement

Blue Arrow – this is known as the "Go To" button, and tapping it gives access to a screen which
allows you to "go to" other areas of the system to setup all aspects of the machine.
• Numbered key – indicates the current permitted access level.
• "i" – indicates a help screen is available for the screen you are viewing. Tap on the "i" to see the
help screen.
• Message within the banner – the banner also acts as a message centre displaying important
messages (in fl ahing red) that may need attention (the screen shot in this supplement gives an
expample of a fault message). Details of System Fault, Run error or Diagnostic messages can be
seen in the help screens associated with the message type when viewing reports and logs. The
bar is also used for benign detector operating information (in green).

Mimic Screen

To get to this screen, tap the "Go To" button when in the Results screen. This screen allows access
to all areas of machine setup. Simply tap on the area of the machine that you want to adjust to be
taken to a menu that will facilitate this.
Detector Front Panel – accesses detector set up data.
Product (represented by the blue box) – allows adjustment of product related variables, such as the
product name and product learn.
Conveyor (just in front of the detector head) – allows adjustment of conveyor settings, such as belt
speed.
Reject – allows adjustment of the reject timing.
PC – allows adjustment of the serial link settings to communicate to another device.
Printer – allows access to view, clear and print reports.
11
IQ³ + User Guide
Supplement