Special Commands; Pause Duration; Begin New Rule; Save Rule - Motorola Symbol DS3408 Product Reference Manual

15 - 8 Symbol DS3408 Product Reference Guide

Special Commands

Pause Duration

This parameter, along with
scanning a two-digit number (i.e., two bar codes), measured in 0.1 second interval in the range of 0.1 to 9.9. For
example, scanning bar codes 0 and 1 in
inserts a 0.5 second delay. The default is 1 second. To correct an error or change a selection, scan
page D-3.

Begin New Rule

Scan this bar code to start entering a new rule
.

Save Rule

Scan this bar code to save the rule.
Send Pause on page 15-34, inserts a pause in the data transmission. Set the pause by
Appendix D, Numeric Bar Codes
Pause Duration
Begin New Rule
Save Rule
inserts a 0.1 second pause; 0 and 5
Cancel on