Chapter 15 Advanced Data Formatting; Introduction; Rules: Criteria Linked To Actions - Motorola Symbol DS3408 Product Reference Manual

Chapter 15 Advanced Data Formatting

Introduction

Advanced Data Formatting (ADF) is a means of customizing data before transmission to the host device. You can
edit scan data to suit particular requirements.
To implement ADF, scan a related series of bar codes, which begin on
Chapter 12, 123 Scan) which programs the digital scanner ADF rules.
Avoid using ADF formatting with bar codes containing more than 60 characters. To add a prefix or suffix value for
such bar codes, use
segments of length 252 or less (depending on the host selected), and applies the rule to each segment.
NOTE If using the Wand interface with the digital scanner, to use ADF rules to format data, first enable
All Bar Codes to Code 39 on page

Rules: Criteria Linked to Actions

ADF uses rules to customize data. These rules perform detailed actions when the data meets certain criteria. One
rule may consist of single or multiple criteria applied to single or multiple actions.
For instance, a data formatting rule could be:
Criteria: When scan data is Code 39, length 12,
and data at the start position is the string "129",
Actions: pad all sends with zeros to length 8,
send all data up to X,
send a space.
Scanning a Code 39 bar code of 1299X1559828 transmits the following: 00001299<space>. If you scan a Code 39
bar code of 1299X15598, this rule is ignored because the bar code did not meet the length criteria.
The rule specifies the editing conditions and requirements before data transmission occurs.
Prefix/Suffix Values on page
10-7.
page 15-8, or install the 123Scan utility (see
14-4. Using ADF with longer bar codes transmits the bar code in
Convert