Default Rules; Adf Bar Codes - Motorola Symbol DS3408 Product Reference Manual

and the SECOND rule states:
When scanning a Code 128 bar code of length 12, send the first four characters, then send the ENTER key,
then send all remaining data.
and you scan a Code 128 bar code of length 12, the THIRD rule applies, and the SECOND rule does not function.
Note that using the standard data editing functions also creates ADF rules. Scan options are entered as ADF rules,
and the hierarchy mentioned above also applies to them. For the digital scanner, this applies to prefix/suffix
programming in Scan Data Transmission Format on page
These rules reside in the same "rule list" as ADF rules, so the order of their creation is also important.

Default Rules

Every unit has a default rule to send all scan data. Units with custom software may have one or more default rules
burned in. The rules hierarchy checks user programmable rules first, then the default rules. Disable default rules by
entering the following general rule in the user programmable buffer:
When receiving scan data, send all data.
Since this rule always applies, ADF never enters the default rules.

ADF Bar Codes

Table 15-1 lists the bar codes available through ADF.
ADF Bar Codes
Table 15-1
Special Commands
Pause Duration
Begin New Rule
Save Rule
Erase
Quit Entering Rules
Disable Rule Set
Criteria
Code Types
Code Lengths
1 Character
7 Characters
14 Characters
21 Characters
Parameter
- 6 Characters
- 13 Characters
- 20 Characters
- 27 Characters
Advanced Data Formatting 15 - 5
14-5.
Page
Number
15-8
15-8
15-8
15-8
15-9
15-9
15-10
15-11
15-11
15-18
15-18
15-19
15-20
15-21