Decoding Preferences Parameter Defaults - Motorola Symbol DS3408 Product Reference Manual

5 - 2 Symbol DS3408 Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Decoding Preferences Parameter Defaults

Table 5-1 lists defaults for digital scanner preferences parameters. To change the default values scan the
appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the
default parameter values, scan
NOTE See
miscellaneous default parameters.
Decoding Preferences Default Table
Table 5-1
Parameter
Decoding Options
Focus Mode
Decoding Illumination
Decode Aiming Pattern
Low Light Enhancement
Presentation Mode Field of View
*Set Defaults on page
Appendix A, Standard Default Parameters
Parameter
F0h A6h
F0h 2Ah
F0h 32h
F1h 64h
F1h 61h
4-3.
for all user preferences, hosts, symbologies, and
Default
Number
Far Focus
Enable
Enable
Disable
Default (Reduced)
Page
Number
5-3
5-4
5-4
5-5
5-5