Cancel; Beeper Definitions - Motorola Symbol DS3408 Product Reference Manual

2 - 2 Symbol DS3408 Product Reference Guide

Beeper Definitions

The digital scanner issues different beep sequences and patterns to indicate status.
sequences that occur during both normal scanning and while programming the digital scanner.
Beeper Definitions
Table 2-1
Beeper Sequence
Standard Use
Short low/short medium/
short high beep sequence
1 short high beep
4 long low beeps
5 low beeps
Lo/hi/lo beeps
Short high/short high/short high/long low
beep sequence
Parameter Menu Scanning
Short high beep
Long low/long high beep sequence
Short high/short low beep sequence
Short high/short low/short high/short low
beep sequence
Short low/short high/short low/short high
beep sequence
Code 39 Buffering
Hi/lo beeps
3 long high beeps
Lo/hi/lo beeps
Lo/hi beeps
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error occurred when scanning a bar code. The data
is ignored. This occurs if the digital scanner is not properly
configured. Check option setting.
Conversion or format error.
ADF transmit error. See Chapter 15, Advanced Data
RS-232 receive error.
Correct entry scanned or correct menu sequence performed.
Input error; incorrect bar code, programming sequence, or Cancel
scanned; digital scanner remains in ADF program mode.
Keyboard parameter selected. Enter value using numeric bar
codes.
Successful program exit with change in parameter setting.
Out of host parameter storage space. Scan
on page 4-3.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The Code 39 buffer was erased or there was an attempt to clear or
transmit an empty buffer.
A successful transmission of buffered data.
Table 2-1 defines beep
Indication
Formatting.
Set Default Parameter