Binding-Table Remove; Dhcp-Snooping - TP-Link JetStream TL-SL5428E Cli Reference Manual

TP-LINK(config)#
00:00:00:00:00:01 vlan 2 port 5 both

binding-table remove

Description
The binding-table remove command is used to delete the IP-MAC –VID-PORT
entry from the binding table.
Syntax
binding-table remove index idx
Parameter
idx —— The entry number needed to be deleted. You can use the show
binding-table command to get the idx. Pay attention to that, the entry number is
the actual number in the binding table not arranged in an order.
Command Mode
Global Configuration Mode
Example
Delete the IP-MAC –VID-PORT entry with the index 5:
TP-LINK(config)# binding-table remove index 5

dhcp-snooping

Description
The dhcp-snooping command is used to enable the DHCP-snooping function
for the switch. To disable the DHCP-snooping function, please use no
dhcp-snooping command. DHCP Snooping functions to monitor the process of
the Host obtaining the IP address from DHCP server, and record the IP address,
MAC address, VLAN and the connected Port number of the Host for automatic
binding.
Syntax
dhcp-snooping
no dhcp-snooping
TL-SL5428E JetStream L2 Managed Switch CLI Guide
binding-table user-bind
63
host1 192.168.0.1