Acl Edit Action - TP-Link JetStream TL-SL5428E Cli Reference Manual

data packets those are transmitted beyond the rate. There are two options,
none and discard. By default, the option is none.
egress-port —— The Destination Port of Redirect. The data packets those
match the corresponding ACL will be forwarded to the specific port. The
destination port ranges from 1 to 28. By default, it is All Ports.
vlan-id —— The VLAN ID of Redirect. The data packets those match the
corresponding ACL will be forwarded in the specific VLAN. The VLAN ID ranges
from 1 to 4094.
dscp —— DSCP of QoS Remark. Specify the DSCP region for the data
packets those match the corresponding ACL. DSCP ranges from 0 to 63. By
default, it is not limited.
local-pri —— Local Priority of QoS Remark. Specify the local priority for the
data packets those match the corresponding ACL. Local Priority ranges form 0
to 3.
mirror —— The Mirror Port of Stream Mirror, ranging form 1 to 28. By default, it
is 1.
Command Mode
Global Configuration Mode
Example
Create a Policy named policy1. For the data packets those match ACL 120 in
the policy, if the rate beyond 1000kbps, will be discarded by the switch:
TP-LINK(config)# acl policy policy-add policy1
TP-LINK(config)# acl policy action-add policy1 120 rate 1000 osd discard

acl edit action

Description
The acl edit action command is used to edit actions for the policy.
Syntax
acl edit action {policy-name} {acl-id} [rate rate] [osd {none | discard}] [e-port
egress-port] [vid vlan-id] [dscp dscp] [pri local-pri] [mirr mirror]
Parameter
policy-name —— The Policy Name, ranging from 1 to 16 characters.
acl-id —— The ACL for configuration in the policy.
rate —— The rate of Stream Condition, ranging from 1 to 1000000 in kbps.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
156