Storm-Control Disable Ul-Rate; Port Rate-Limit - TP-Link JetStream TL-SL5428E Cli Reference Manual
Jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
Disable the Multicast packets control for port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable mc-rate
storm-control disable ul-rate
Description
The storm-control disable ul-rate command is used to disable the UL-Frame
control.
Syntax
storm-control disable ul-rate
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the UL-Frame control for port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable ul-rate
port rate-limit
Description
The port rate-limit command is used to configure the Rate Limit for an Ethernet
port. To disable the Rate Limit, please use no port rate-limit command.
Syntax
port rate-limit [ ingress ingress-rate ] [egress egress-rate ]
no port rate-limit
Parameter
ingress-rate —— Select the bandwidth for receiving packets. The value of it
can be 100 | 200| 500kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps.
egress-rate —— Select the bandwidth for sending packets. The value of it can
be 100 | 200| 500kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
131
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?