Datavideo SE-900 Instruction Manual page 48

Effects section for more
details.
Border adds a border to
certain effects, such as
PIP or Wipes.
You can select between
three border widths, N
(Narrow), M (Medium)
and W (Wide), simply by
repeatedly pressing the
BDR Key.
The active width and
colour is indicated in the
Status Display
Transitions
The SE-900 features 14 programmable wipe patterns and an A/B dissolve. All wipes can have optional
colour borders applied, and each can be set to one of six preset speeds. The active transitions, speed,
border width and colour is displayed in the Status Display.
Transitions can also be performed manually by using the T-Bar.
Left to Right Wipe
Horizontal from
Centre Wipe
Corner Wipe In
from Top Left
Box Wipe In from
Centre
Border Colour sets the
colour of the border to be
used with effects such as
PIP or Wipes.
You can select from 8
colours.
The active colour is
indicated in the Status
Display
Right to Left Wipe
Horizontal to
Centre Wipe
Corner Wipe In
from Bottom Right
Box Wipe Out to
Centre
details
Background Colour sets the
background colour for use on
the Main and Sub Source Rails.
You can select from 8 solid
colours, Colour Bars or Framing
Lines.
The active BG Colour is
indicated in the Status Display
Bottom to Top
Wipe
Vertical from
Centre Wipe
Corner Wipe In
from Bottom Left
Dissolve
Top to Bottom
Wipe
Vertical to Centre
Wipe
Corner Wipe in
from Top Right
Speed
adjustment to six
preset speeds.
48