Invacare Wheelchair Pronto M91 Base Owner's Manual page 40

SECTION 5—WHEELCHAIR OPERATION
Drive Profile Name
Available Modes in
Battery Gauge Display
Drive Indicator
this Drive (Must be
Programmed)
Icon appears when a
joystick command
Status
will drive the
Status/Info ECU
Indicator
wheelchair
Message Area
FIGURE 5.6 LCD Display Screens - Main Screen
Driving Screen
NOTE: For this procedure, refer to
FIGURE 5.7.
This screen is shown when the operator
issues a drive command and the Drive Icon
on the main screen was highlighted.
NOTE: The Drive's name, warning/info
message, status icon and battery indicator are
displayed on this screen.
FIGURE 5.7 LCD Display Screens - Driving
Screen
Connected Devices Screen
NOTE: For this procedure, refer to FIGURE 5.8.
This screen is displayed if the Mode Select switch is held active for about 10 seconds. This
screen shows an icon that represents any additional devices that are connected to the
chair.
40
Pronto® M91™Base with SureStep® Part No 1143153