Installing - Invacare Wheelchair Pronto M91 Base Owner's Manual

Installing

1. Perform one of the following:
• Top Shroud ‐ Position top shroud on to the base frame and gently press down on
top shroud to secure the four hook and loop strips that secure the top shroud to the
base frame (Detail "A").
• Front Shroud ‐ Position front shroud onto the two base frame hooks. Turn release
knob ¼‐turn to the locked position (Detail "B").
2. Perform one of the following:
• Wheelchairs with Formula PTO Plus ‐ Tilt the seat forward. Refer to Tilting the
Seat Assembly on page 47.
• Wheelchairs without Formula PTO Plus ‐ Reinstall the seat. Refer to Removing/
Installing the Seat Assembly on page 46.
DETAIL "A" - TOP SHROUD
Rear of
Wheelchair
Base Frame
Hook and
Loop Strips
Part No 1143153
Top Shroud
Seat Supports
Front of
Wheelchair
FIGURE 8.1 Removing/Installing the Shrouds
SECTION 8—SHROUD/WHEELS
DETAIL "B" - FRONT SHROUD
Base
Frame
Hooks
53
Pronto® M91™Base with SureStep®
Front
Shroud
Release
Knob