Invacare Wheelchair Pronto M91 Base Owner's Manual page 66

SECTION 9—BATTERIES
Required Items:
TOOL
Battery Charger
Extension Cord
1. Attach the battery charger connector to the charger port on the joystick.
2. Plug the charger's AC power cord, or extension, into the grounded 120 VAC wall
outlet.
3. Wait until charging is complete.
NOTE: Allow eight hours for normal charging. Larger batteries (greater than 55 ampere‐hours) or
severely discharged batteries may require up to sixteen hours to be properly charged and equalized.
NOTE: It is advantageous to recharge frequently rather than only when necessary. In fact, a
battery's life is extended if the charge level is maintained well above a low condition.
NOTE: If the batteries need to be charged more often or take longer to charge than normal, they
may need to be replaced. Contact an Invacare dealer for service.
Pronto® M91™Base with SureStep®
QUANTITY
SPJ Joysticks
Charger/
Programming
Port
FIGURE 9.7 Charging Batteries
1
1
MPJ Joystick
Charger/Programming Port (On
Front of Joystick)
66
COMMENTS
Supplied
Not Supplied
Part No 1143153