Section 5-Wheelchair Operation; Operating The Wheelchair; Turning The Power On/Off - Invacare Wheelchair Pronto M91 Base Owner's Manual

Base with surestep
Hide thumbs Also See for Wheelchair Pronto M91 Base:
Table of Contents

Advertisement

SECTION 5—WHEELCHAIR OPERATION
SECTION 5—WHEELCHAIR
OPERATION
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified techni-
cian. The final adjustments of the controller may affect other activities of the wheel-
chair. Damage to the equipment could occur under these circumstances.

Operating the Wheelchair

Turning the Power On/Off

NOTE: For this procedure, refer to FIGURE 5.1.
1. To turn the power On, perform one of the following steps: 
JOYSTICK
MPJ™+
SPJ™+
2. Turning the power Off can be achieved by performing one of the following steps:.
JOYSTICK
MPJ+
SPJ+
Pronto® M91™Base with SureStep®
WARNING
Move the On/Off switch Forward to the On position.
Press the On/Off button.
Move the On/Off switch Back to the Off position.
Press the On/Off button.
SPJ+ Joysticks
On/Off
Button
FIGURE 5.1 Turning the Power On/Off
32
ACTION
ACTION
MPJ+ Joystick
On/Off
Switch
Part No 1143153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents