Using The Unit - iHome iBN48 User Manual

Using the Unit

Connecting the Unit to Power Source
Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into the wall
outlet.
Charging the Internal Battery
The iBN48 has an internal rechargeable Lithium-ion battery which should last the life of the unit. Charge the battery fully
for first time use. Please allow at least 6 hours to fully charge the unit for first time use.
1. Make sure the AC adaptor is properly connected to the unit and plugged into a working power source.
2. The internal battery will charge. While the battery is charging, the blue LED battery indicator lights will cycle to the right.
3. When the battery is fully charged, all 4 battery indicators will remain lit while the unit is powered on. As the battery runs
down, the lights will go out (see below).
Fully charged 75-50% charge 50-25% charge 25-5% charge
When there is no battery indicator light, the battery is dead and needs to be charged. NOTE: Even if the battery is dead,
the unit will still operate while connected to AC power.
Turning the Unit ON or OFF
Press and release the Power Button on the unit at any time as needed to turn the unit ON.
Press the Power Button to turn the unit off.
Listening to Bluetooth Audio
Once you have paired a compatible Bluetooth device with the iBN48, use the controls on your device to play or pause
audio and navigate tracks.
Press or to set the volume to your desired level. The Volume + LED will flash 3 times when the volume reaches
maximum, and Volume - LED will flash 3 times in a blue color when volume reaches minimum, then return to last status
settings.
3