Installing The Cabinet; Corner Installation - AGA marvel M60CSS Installation, Operation And Maintenance Instructions

Built in side by side refrigerator/freezer
Table of Contents

Advertisement

Available languages

Available languages

When planning your rough in opening a 3" removable filler
panel is recommended above the grille. To remove the
power module from the cabinet the front has to be tilted up
as shown in Figure 6 when removed for service.
-3" (7.6cm) removable filler
recommended
84
"
5
8
(214.9cm)
Maximum

INSTALLING THE CABINET

Figure 6

Corner Installation

For the door to be opened to a full 90°, a 3" (7.6cm) filler
will have to be added to the hinge side of the door. This is
to allow for door handle clearance when opened to the wall.
See Figure 7.
Enclosure must permit refrigerator/freezer to be removed
for service.
Cabinet Width
3" Min.
Filler
15
Cabinet Outline
Figure 7

Advertisement

Table of Contents
loading

Table of Contents