Installing The Anti-Tip Device - AGA marvel ML15WSG2 Series Installation, Operation And Maintenance Instructions

Figure 5
!
WARNING
•
•
•
Anti-Tip Device
!
WARNING
If your wine cellar is not located under a counter top
(free standing), you must use an anti-tip device
installed as per these instructions. If the wine cellar is
removed from its location for any reason, make sure
that the device is properly engaged with the anti-tip
bracket when you push the wine cellar back into the
original location. If the device is not properly engaged,
there is a risk of the wine cellar tipping over, with the
potential for property damage or personal injury.
Front grille
Front grille screw
ALL APPLIANCES CAN TIP
RESULTING IN INJURY.
INSTALL THE ANTI-TIP
BRACKET PACKED WITH
THE APPLIANCE.
FOLLOW THE INSTRUC -
TIONS BELOW
NOTE
to nuisance tripping
the appliance to shut
generally not used on circuits with power equipment that must
run unattended for long periods of time, unless required to
meet local building codes and ordinances.
INSTALLING THE
ANTI TIP DEVICE
FOR FREESTANDING
INSTALLATIONS
Anti-Tip
Bracket
⁄
1
21 "
2
(54.6 cm )
NOTE
If installing on a concrete floor, concrete fasteners are
required, (not included with the anti-tip kit).
!
CAUTION
Any finished flooring should be protected with appropriate
material to avoid damage when moving the unit.
6
Figure 6
Ground Fault
Circuit Interrupters
(GFCI) are prone
which will cause
down. GFCI's are
Leveling Leg
Bottom View of
Wine Cellar
Front of cabinet
Figure 7