Sirius XM RAdio TTR1 User Manual page 18

Installation
To connect to a wireless network using the Network Wizard
If the wireless network is secured, you'll need to enter the key (password) for the
wireless network during the connection procedure . If you don't know the password,
contact your network administrator of the person who setup the wireless network .
a.
If you have just turned your SiriusXM TTR1 Radio on for the first time, the
SSID screen will already be displayed . Skip ahead to step e .
b.
Press MENU and turn the TUNE knob to highlight System Setup . Press
the TUNE Knob .
c.
Turn the TUNE knob to highlight Network . Press the TUNE Knob .
d.
Press the TUNE Knob to select Network Wizard .
e.
The Radio will scan for wireless networks and return with a list of
wireless networks which were found . (A
sample screen is shown here . Your actual
wireless network name will appear in
the list, if found .) Turn the TUNE knob
to highlight your wireless network and
press the TUNE knob . If you don't know
the network name, contact your network
administrator of the person who set up the
wireless network .
f.
If you choose an unsecured network, and
the Radio is able to connect to the wireless
network, the Connected screen will be
displayed and the Radio will connect to the
18
SSID
[Wired]
Your_Network_Name
Other_Network_Name
[Rescan]
[Manual config]
Connected
Connected