Sirius XM RAdio TTR1 User Manual page 67

a.
If you have just turned your SiriusXM TTR1 Radio on for the first
time, the SSID screen will already be displayed . Skip ahead to step d .
b.
Press MENU and turn the TUNE knob to highlight System Setup .
Press the TUNE Knob .
c.
Turn the TUNE knob to highlight Network . Press the TUNE Knob .
d.
Turn the TUNE Knob to highlight Manual Settings or [Manual
config] . Press the TUNE Knob .
e.
Turn the TUNE Knob to highlight
Wireless . Press the TUNE Knob .
f.
Will you be using DHCP? Turn the
TUNE Knob to highlight DHCP enable
or DHCP disable and press the TUNE
Knob .
g.
If you have selected DHCP disable, enter the following information .
Otherwise, continue with step h .
For each entry, Turn the TUNE knob to select the numbers, and
press the TUNE knob to confirm and move to the next number .
Press BACK if you entered an incorrect number .
TIP! You can use the Remote Control to increment the numbers (
move forward or backward through the number fields ( + and —) .
i . Enter the IP address to use for the Radio .
ii . Enter the Subnet Mask for the network .
Connection type
Wired
Wireless
>
>
), and
67