Disassembly Instructions - Mitsubishi Electric MUZ-A18YV Service Manual

11

DISASSEMBLY INSTRUCTIONS

<"Terminal with lock mechanism" Detaching points>
In case of terminal with lock mechanism, detach the terminal as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with lock mechanism.
The terminal with no lock mechanism can be removed by pulling it out.
Check the shape of the terminal and work.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
MUZ-A18YV - MUZ-A24YV -
E1
OUTDOOR UNIT
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Remove the screws of the cabinet.
(8) Remove the cabinet.
(9) Remove the screws of the back panel.
(10) Remove the back panel.
Photo 3
Screws
of the
back
panel
Set screws of the back panel
1Slide the sleeve.
2Pull the terminal while
pushing the locking
lever.
MUZ-A26YV -
E1
Screw of the motor support
(2) The terminal with this connector is a terminal
with lock mechanism
Connector
NOTE :
E1 These photos are MUZ-A26YV.
Other models are almost the same as MUZ-A26YV.
Photo 1
Screws
of the
cabinet
Photo 2
Screw of the service panel
Screws
of the
cabinet
46
1Hold the sleeve, and
pull out the terminal
slowly.
PHOTOS
Screw of the top panel
Screws of the cabinet
Screws
of the
top
panel
Screw
of the
valve
cover