Disassembly Instructions - Mitsubishi Electric MUZ-AP25VG-E1 Service Manual

13

DISASSEMBLY INSTRUCTIONS

<Detaching method of the terminal with locking mechanism >
The terminal which has the locking mechanism can be detached as shown below.
There are 2 types of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
13-1. MUZ-AP25VG
MUZ-AP25VGH MUZ-AP35VGH MUZ-AP42VGH
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screw fixing the service panel.
(2) Pull down the service panel and remove it.
(3) Disconnect the power supply cord and indoor/outdoor
connecting wire.
(4) Remove the screws fixing the top panel.
(5) Remove the top panel.
(6) Remove the screws fixing the cabinet.
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the back panel.
OBH789H
Slide the sleeve.
Pull the terminal while
pushing the locking lever.
MUZ-AP35VG MUZ-AP42VG
(2) The terminal with this connector shown below has the
locking mechanism.
Hold the sleeve, and
pull out the terminal slowly.
Connector
: Indicates the visible parts in the photos/figures.
: Indicates the invisible parts in the photos/figures.
PHOTOS/FIGURES
Photo 1
Screws of the
top panel
Screws of the
cabinet
Photo 2
Screw of the
cabinet
Screws of the
cabinet
Screws of the
cabinet
77
Back
panel
Screws of the
top panel
Screws
of the
back
panel
Service
panel
Screws of
the terminal block
support and the
back panel
Screws of the
service panel
Direction to
remove
Hooks