Related Manuals for Mitsubishi Electric MSZ-AP15VGD
Summary of Contents for Mitsubishi Electric MSZ-AP15VGD
- Page 1 SPLIT-TYPE AIR CONDITIONERS INDOOR UNIT MSZ-AP15VGD MSZ-AP20VGD For user OPERATING INSTRUCTIONS English • To use this unit correctly and safely, be sure to read these operating instructions before use.
- Page 2 ● OPERATING INSTRUCTIONS ● ENGLISH IS ORIGINAL ONTENTS ■ SAFETY PRECAUTIONS ■ NAME OF EACH PART ■ PREPARATION BEFORE OPERATION ■ SELECTING OPERATION MODES ■ FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT ■ I-SAVE OPERATION ■ ECONO COOL OPERATION ■ TIMER OPERATION (ON/OFF TIMER) ■...
-
Page 3: Safety Precautions
To use this unit correctly and safely, be sure to read these operating instructions before use. AFETY PRECAUTIONS This appliance is not intended for use by persons (including Do not use the unit for special purposes, such as storing food, children) with reduced physical, sensory or mental capabilities, raising animals, growing plants, or preserving precision devices or lack of experience and knowledge, unless they have been... - Page 4 ● OPERATING INSTRUCTIONS ● AFETY PRECAUTIONS For installation WARNING Consult your dealer for installing the air conditioner. • It should not be installed by the user since installation requires specialized knowledge and skills. An improperly installed air con- ditioner may cause water leakage, fi re, or electric shock. Provide a dedicated power supply for the air conditioner.
-
Page 5: Indoor Unit
AME OF EACH PART Indoor unit Remote controller Battery replacement indicator Signal transmitting Page 5 Air inlet section Front Distance of signal : panel About 6 m Beep(s) is (are) heard Air fi lter from the indoor unit when the signal is Operation received. -
Page 6: Preparation Before Operation
● OPERATING INSTRUCTIONS ● REPARATION BEFORE OPERATION Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on. Installing the remote controller batteries Setting current time Press the DAY button Press RESET. to set the day. Press CLOCK. -
Page 7: Selecting Operation Modes
ELECTING OPERATION MODES DRY mode Dehumidify your room. The room may be cooled slightly. Temperature cannot be set during DRY mode. HEAT mode Enjoy warm air at your desired temperature. FAN mode Circulate the air in your room. Note: After COOL/DRY mode operation, it is recommended to operate in the FAN mode to dry inside the indoor unit. - Page 8 ● OPERATING INSTRUCTIONS ● AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT Up-down Airflow direction Press to select airfl ow direction. Each press changes airfl ow direction in the following order: (AUTO) (SWING) (AUTO) ..The vane is set to the most effi cient airfl ow direction. COOL/ DRY:horizontal position.
-
Page 9: Save Operation
-SAVE OPERATION CONO COOL OPERATION • A simplified set back function enables to recall the preferred (preset) setting Swing airfl ow (change of air fl ow) makes you feel cooler than stationary airfl ow. with a single push of the button. - Page 10 ● OPERATING INSTRUCTIONS ● IGHT MODE OPERATION NIGHT MODE operation changes the brightness of the operation indicator, disables the beep sound and limits the noise level of the outdoor unit. Press during operation to activate NIGHT MODE operation. • The operation indicator lamp dims. •...
-
Page 11: Weekly Timer Operation
EEKLY TIMER OPERATION • A maximum of 4 ON or OFF timers can be set for individual days of the week. • A maximum of 28 ON or OFF timers can be set for a week. Press , and to set ON/OFF, time, and temperature. -
Page 12: Emergency Operation
● OPERATING INSTRUCTIONS ● EMAND RESPONSE AND INDOOR UNIT OPERATION (DEMAND TYPE ONLY) Demand response This unit has the demand response capability which is compliant with AS/NZS 4755.3.1. To activate this function, you need to make a contract with remote agents such as electric supply company, then this unit should be connected to the demand response enabling devise (DRED). -
Page 13: Air Filter
LEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Do not soak or rinse the horizontal vane. • Be careful not to touch the metal parts with your hands. • Do not use water hotter than 50°C. •... -
Page 14: When You Think That Trouble Has Occurred
● OPERATING INSTRUCTIONS ● HEN YOU THINK THAT TROUBLE HAS OCCURRED Even if these items are checked, when the unit does not recover from the Symptom Explanation & Check points trouble, stop using the air conditioner and consult your dealer. Does not cool or heat The room cannot be cooled •... -
Page 15: Specifications
HEN THE AIR CONDITIONER IS NOT NSTALLATION PLACE AND GOING TO BE USED FOR A LONG TIME ELECTRICAL WORK Installation place Operate by COOL mode with the highest temperature Avoid installing the air conditioner in the following places. set or FAN mode for 3 to 4 hours. Page 6 •... - Page 16 HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN JG79Y725H01...