Disassembly Instructions - Mitsubishi Electric MSZ-LN18VG2W-SC1 Service Manual

11

DISASSEMBLY INSTRUCTIONS

<Detaching method of the terminal with locking mechanism>
The terminal which has the locking mechanism can be detached as shown below.
There are 2 types of the terminal with locking mechanim.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
MSZ-LN18VGW MSZ-LN25VGW
MSZ-LN18VGV MSZ-LN25VGV
MSZ-LN18VGB MSZ-LN25VGB
MSZ-LN18VGR MSZ-LN25VGR
MSZ-LN18VG2W MSZ-LN25VG2W
MSZ-LN18VG2V MSZ-LN25VG2V
MSZ-LN18VG2B MSZ-LN25VG2B
MSZ-LN18VG2R MSZ-LN25VG2R
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the front panel and the panels (U/R/L/F)
Removing the front panel (Photos 1, 2)
(1) Hold the front panel and open it.
(2) Insert a screwdriver deeply into the holes to remove
the front panel.
Pry off the right and left arm holders by moving the
screwdriver down and towards the back wall (Photo
2-1).
(3) Remove the safety string from the center of the panel
(F).
NOTE: Hold the panel with your hand while detaching it
to avoid injury. (Figure 1)
Photo 2-2
Figure 1
(1)
OBH766G
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
MSZ-LN35VGW
MSZ-LN35VGV
MSZ-LN35VGB
MSZ-LN35VGR
MSZ-LN35VG2W
MSZ-LN35VG2V
MSZ-LN35VG2B
MSZ-LN35VG2R
(1)
(2)
(3)
(2) The terminal with this connector shown below
has the locking mechanism.
Hold the sleeve, and
pull out the terminal
slowly.
Connector
MSZ-LN50VGW
MSZ-LN50VGV
MSZ-LN50VGB
MSZ-LN50VGR
MSZ-LN50VG2W
MSZ-LN50VG2V
MSZ-LN50VG2B
MSZ-LN50VG2R
: Indicates the visible parts in the photos/figures.
: Indicates the invisible parts in the photos/figures.
PHOTOS/FIGURES
Photo 1
Outer vane (L)
(horizontal)
Screw of the left
side of the panel (U)
Panel (U)
Photo 2
Front panel stopper
(Enlarged view of the front panel stopper)
Photo 2-1
55
MSZ-LN60VGW
MSZ-LN60VGV
MSZ-LN60VGB
MSZ-LN60VGR
MSZ-LN60VG2W
MSZ-LN60VG2V
MSZ-LN60VG2B
MSZ-LN60VG2R
Front panel
Outer vane (R)
(horizontal)
Screw of the right
side of the panel (U)
Catch
Safety string
Holes to remove
the front panel
Front panel stopper
Insert a screwdriver
into the hole, and
move it down and
towards the back
wall.