Martin Mania EF3 User Manual page 15

Caution Hot lamp.
Only the Philips 12V EFP/8H 100W (type No 6834) lamp is supported
(Martin P/N 97000004). These lamps normally last for 800 hours of
operation.
Warning Installing any other lamp may damage the fixture!
Installing a lamp in the Mani a EF3
1 Disconnect the fixture from power and allow it to cool for 20 minutes.
2 Remove the thumb screw holding the cover in place.
3 Slide the fixture cover open as far as possible (there is a physical stop
point that prevents access to the power supply section).
4 Grasp the old lamp by the reflector and slide it carefully out of the lamp
holder.
Thumb screw
Basic service 15