Overhead Mounting - Martin Mania EF3 User Manual

Installing a plug on the mains lead
Warning! For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply shall have
overload and ground-fault protection.
Important! Verify that the feed cables are undamaged and rated for the
current requirements of all connected devices before use.
The fixture's mains lead may require a grounding-type cord cap that fits
your power distribution cable or outlet. Consult a qualified electrician if you
have any doubts about proper installation.
Following the cord cap manufacturer's instructions, connect the
appropriate wires to ground (earth), live, and neutral. The following table
below shows some common wire identification schemes.
Applying power
1 Connect the mains power cable to the fixture at the 3-prong IEC male
input socket at the rear of the fixture.
Mains socket
2 Turn the lamp on using the power on/off switch.
O V E R H E A D M O U N T I N G
The Mania EF3 is designed to be hung overhead with a clamp (not
included).
Warning! Block access below the work area before proceeding.
8
Function Wire (EU)
live brown
neutral blue
ground yellow/green
Mania EF3 user manual
Wire (US)
black
white
green
Power on/off switch