Demounting The Implement From The Tractor - Major MR150 Operator's Manual And Parts List

Demounting the Implement from the Tractor

•
Disengage the PTO. Set the implement on a flat surface. Stop the tractor and engage the parking brake.
•
Rest the mower on the ground.
•
Switch off the tractor engine.
•
Remove the ignition key from the dashboard.
•
Remove the driveline.
•
Block the mower's wheels with wedges or other suitable means.
•
Detach the implement from the tractor by disconnecting the three-point hitch.
MAINTENANCE OF THE MOWER
The machine must always be disconnected from the tractor before any cleaning, lubricating and servicing
operations are carried out. If interventions must inevitably be carried out while the machine tool is still attached to
the tractor,
proceed as follows:
•
disengage the power takeoff;
•
insert the brake;
•
turn off the tractor engine;
•
remove the ignition key from the dashboard.
To prevent all risks, the operator should not merely trust in the hydraulic system of the tractor since this can be
liable to leaks able to lower the machine even when the engine is off. Always block the machine with a rigid
support when work must be carried out underneath.
Good, regular maintenance and correct use are essential if the mower is to remain safe and long lasting.
Respect the following rules, which can also be found on the plates attached to the machine.
15