One Touch; Ignoring Certain One Touch Settings (Hold) - Roland G-70 Owner's Manual

G-70 Music Workstation
Additional Arranger/Style functions

One Touch

You may find yourself using the One Touch function at
regular intervals, because it automates quite a few
tasks. The G-70's One Touch memories are actually
"miniature User Programs" that go way beyond any-
thing you may know from other arranger instruments.
The ONE TOUCH function makes the following auto-
matic settings:
Tone Selection
Harmonic Bar status
Volume
Pan setting
Reverb Send
Chorus Send
Octave setting
'Tone Edit' settings
C1 value
MFX status
MFX part assign
Harmonic Bar effects UP1, LW1, MBS
Part status (on/off)
Main Split
Upper 3 Split
Upper 3 Split
Bass Inversion
Keyboard Mode
Sync Start & Stop
Intro/Ending
Style pattern
(1) Press a ONE TOUCH button.
There are four One Touch memories per Music Style
(for the 285 factory Styles and 120 CUSTOM memo-
ries).
(2) Select a Style (page 27) and start Arranger play-
back (see p. 74).
(3) Play a melody to the accompaniment.
You will notice that the sound of the UP1 (or any
other Keyboard part) matches the style and mood of
the selected Style.
(4) Select a different Style and again play a solo line:
the active Keyboard parts now use different
sounds.
(5) Press another ONE TOUCH button.
78
UP1, UP2, UP3, LW1, LW2, MBS
UP1, LW1, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1, UP2, UP3, LW1, LW2, MBS
UP1
UP1, UP2, UP3, LW1, LW2, MBS,
MELODY INT, D Beam
UP1, UP2, UP3, LW1, LW2, MBS
(value)
(value)
(status: on or off)
(status: on or off)
SPLIT or WHOLE
Status
(status: on or off)
VARIATION [1]~[4]
1
(6) Press the same button again if you no longer need
the One Touch setting.
As you see, the One Touch memories apply to all Key-
board parts.
Note: If a One Touch memory is active while you recall a User
Program, the One Touch function is switched off.
IIf you select a One Touch memory while another
one is already active
In that case, the G-70 immediately selects of the set-
tings of that memory and thus changes the registra-
tion.

Ignoring certain One Touch settings (Hold)

The G-70 provides several "HOLD" options that allow
you to filter certain One Touch settings.
(1) Press and hold a ONE TOUCH [1]~[4] button.
The display changes to:
(2) Press the fields corresponding to the settings that
should not be loaded when you select another One
Touch memory or Music Style.
When you change a setting, the field of the last One
Touch memory you selected is indicated by means of
an asterisk (*). Button icons in the HOLD column
whose indicator lights refer to settings that are not
updated:
G TEMPO—The preset tempo of the selected Music Style.
G KBD PART—The current status of the Keyboard parts
(UP1/2/3, LW1/2 and MBS). The on/off status of the Key-
board parts can be saved to a One Touch memory. Fur-
thermore, the Split and Upper 3 Split settings no longer
change.
G INTRO/ENDING—The INTRO or ENDING pattern is no
longer activated when you select Styles (even if its "on"
status has been saved to a One Touch registration).
G MAIN VAR—When you select another Style, the G-70 no
longer loads the memorized MAIN VARIATION [1]~[4]
pattern, but goes on using the last pattern you selected.
Press the [ALL] field to switch on all HOLD options.
Press [NONE] to switch all options off.
Note: The One Touch function is switched off whenever you
select a User Program.
Note: The SYNC [START] (page 75) and [INTRO] buttons are not
automatically switched on when you select a One Touch mem-
ory or Music Style while Arranger playback is stopped.