Roland G-70 Owner's Manual page 108

G-70 Music Workstation
Using the mixer functions & effects
Extremely important remark
Before you even consider spending some time with the
Vocal Harmonist effects, you need to change the fol-
lowing parameter. If you don't, your changes will be
lost as soon as you press another VOCAL HARMONIST
button.
Do not change this setting if you are happy with the
way the effects sound and therefore have no intention
to delve into this matter. The following setting is
remembered even after you switch off your G-70.
(1) Press the [MENU] button.
MENU
The display changes to:
(2) Press the [UTILITY], then the [GLOBAL] field.
(3) Press the [HARMONIST¥FX¥LINK] button icon.
Switch it on to use the most suitable effect settings
for each Vocal Harmonist part. Switch it off to leave
the current effect settings intact.
108
And now... the Vocal Harmonist effects
(1) Press and hold a button to the right of the [VOICE]
or the [HARMONY] knob.
This takes you to the page of the selected Vocal Har-
monist function.
(2) To edit the effect parameters, press the
[EFFECT¥TYPE] field.
(3) Decide which effect processor you wish to edit:
• To edit a VOICE effect, press the [REVERB] or [DELAY]
field below "VOICE EFFECT".
• To edit a HARMONY effect, press [REVERB],
[CHORUS] or [DELAY] below "HARMONY EFFECT".
Only the HARMONY parts (Vocoder, Small, Ensemble)
have a Chorus processor. The parameters and presets
for the Reverb and Delay processors differ between
the VOICE EFFECTS and HARMONY EFFECTS sections.
(4) Press the VOCAL HARMONIST button for which you
want to program the effect and talk/sing into the
microphone while setting the following parame-
ters.
VOICE
VOICE TALK FX
AUTO
PITCH SINGER
OFF MAX
If necessary, you can use the [VOICE] or [HARMONY]
knob to temporarily set the volume of the part you
don't want to hear to "0".
HARMONY VOCODER
SMALL ENSEMBLE
OFF MAX