Section 10-Joystick; Preparing The Joystick For Use - Invacare Nutron R50LX Owner's Operator And Maintenance Manual

SECTION 10—JOYSTICK
SECTION 10—JOYSTICK
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.

Preparing the Joystick For Use

NOTE: For this procedure, refer to FIGURE 10.1.
NOTE: The joystick is factory installed on the right side of the wheelchair. To reposition the joystick
onto the left side of the wheelchair refer to Repositioning the Joystick on page 47. The joystick
should be repositioned by a qualified technician.
1. Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2. Slide joystick mounting tube to the desired position.
3. Turn the adjustment lock lever to secure the joystick mounting tube in the mounting
bracket.
Joystick Mounting Tube
Adjustment Lock Lever
Nutron® Series
WARNING
Mounting Bracket
FIGURE 10.1 Preparing the Joystick For Use
46
Part No.1106645