Inspect/Adjust Monthly; Inspect/Adjust Periodically - Invacare Nutron R50LX Owner's Operator And Maintenance Manual

Inspect/Adjust Monthly

❑ Ensure arm pivot points are free of wear and looseness.
❑ Ensure wheel mounting bolts are secure on drive wheels.
❑ Ensure no excessive side movement or binding when drive wheels are lifted and spun
when disengaged (free‐wheeling).
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect for any loose hardware on the wheelchair.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.

Inspect/Adjust Periodically

❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest pads sit flush against arm tubes.
❑ Inspect seat and back upholstery for rips or sagging.
❑ Ensure seat release latch is not worn. Replace if necessary.
❑ Clean upholstery and armrests.
❑ Inspect the seat positioning strap for wear. Replace if worn or damaged.
❑ Inspect charger AC power cord for damage. Replace if necessary.
Part No.1106645
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
CAUTION
24
Nutron® Series