Table of Contents
Advertisement
Disassembly
24
3.
Turn the phone over and use the disassembly tool to separate the front housing
from the rear housing as shown in Figure 6. Use the disassembly to gentle pry
around the sides and lift the front housing and keypad from the phone.
Figure 5. Separating the Front and Rear Housings
4.
Lift the right and left side key flex away from the transceiver PC board to avoid
damage to the printed flex cables (see Figure 6).
March 06, 2006
Disassembly tool
Front Housing Assembly
Rear Housing
U6 GSM
050104o
6809493A67-O
Advertisement
Table of Contents
