Table of Contents
Advertisement
Level 1 and 2 Service Manual
ment
6809493A67-O
4.
Rotate and then pull the transceiver housing away from flip as shown.
Figure 26.
5.
Place the flip assembly with the PCB attached down in the open position. The
Keypad/Front housing assembly is loose and can be removed from the
assembly. Note: Do not fully close the assembly when the XCVR housing is not
attached.
Figure 27.
March 06, 2006
EL (Electroluminescent) Mylar Removal and Replace-
060261o
060265o
43
Advertisement
Table of Contents
