Unpacking Instructions - Life Fitness 5500HR Assembly Instructions Manual

Life Fitness Models 5500HR / 8500 / 9100 / 9500HRR Cross-Trainer Unpacking Instructions

UNPACKING INSTRUCTIONS

Step 1
Remove all staples from the corrugated shipping container and fold down the four sides of the base tray (A).
Step 2
Lift and open the top flaps of the shipping container sleeve (B). Lift and remove the two front support posts (C).
Step 3
With the help of another person, carefully lift the shipping container sleeve (B) up and off of the base tray (A) and over
the Cross-Trainer (D). Remove the ship kit box (E) from the Cross-Trainer and set aside. Remove the remaining
corner posts (F) and ship kit support (G).
E
D
H
F
SAVE YOUR PACKING MATERIALS IN CASE OF RETURN
G
IMPORTANT
Step 4
Using a screwdriver, remove the rear
locator pad (H) from the base tray (A).
Step 5
Carefully lift the front of the unit and slowly
roll the unit backward beyond the flattened
base tray.
Step 6
Follow the Installation Instructions included
in the parts bag to complete the assembly
of your Cross-Trainer.
B
Ship Kit Contents:
Left & Right User Arms
Console Support Assembly
Left & Right Front Covers
Display Console
Front & Back Monocolumn Covers
Hardware Kit
Installation Instructions
Polar Receiver Kit
( 9100 / 9500HRR Only )
Reading Rack Assembly
( 9500HRR Only )
Heart Rate Monocolumn Covers
( 5500HR Only )
Line Cord (International Only)
Power Supply
C Polar Transmitter Kit
A
MO51-00K61-A004