Step 6 Position Water Line And House Wiring; Step 7 Install Drain Hose Through Cabinet; Step 8 Slide Dishwasher Partially Into Cabinet - GE ZBD1870NSS Installation Instructions Manual

Ge built-in dishwasher installation instructions
Table of Contents

Advertisement

Installation Instructions
STEP 6 POSITION WATER LINE AND
HOUSE WIRING
• Position water supply line and house wiring on the fl oor of
the opening to avoid interference with base of dishwasher
and components under dishwasher.
House
Water
Wiring
Line
Figure P
STEP 7 INSTALL DRAIN HOSE THROUGH
CABINET
• Stand the dishwasher upright and position in front of the
opening. Insert drain hose into cabinet wall hole. If a power
cord is used, guide the end through a separate hole.
Insulation
Blanket
Water
Power Cord
(If Used)
Figure Q
TIP: Position water line and house wiring on the floor
to avoid interference with base of dishwasher.
4"
6"
Maximum
Drain Hose
Length 10"
Line
Drain
Hose
House
Wiring
STEP 8 SLIDE DISHWASHER PARTIALLY
INTO CABINET
DO NOT PUSH AGAINST FRONT PANEL WITH KNEES.
DAMAGE WILL OCCUR.
• Slide dishwasher into the opening a few inches at a time.
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure R
• As you proceed, pull the drain hose through the opening
under the sink. Stop pushing when the dishwasher is a few
inches forward of adjacent cabinetry.
• Make sure drain hose is not kinked under the dishwasher and
there is no interference with the water line and wiring or any
other component.
Reposition Dishwasher
by Grasping Both Sides
With Hands.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monogram zbd1850Monogram zbd1870

Table of Contents