Installation And Connection; Precautions And Notes On Installation And Connection - Omron POWLI BU50XS Instruction Manual

2. Installation and connection

2. Installation and connection

2-1 Precautions and notes on installation and connection

Precautions and notes on installation and connection are given below. Be sure to read them for correct use.
The weight of the product is 13kg (BU50XS, BU70XS) / 15.5kg (BU100XS).
Unpack/transport this product considering this weight.
● Dropping may cause injury.
Keep packing materials including plastic bags and films out of the reach
of children.
● They may put their head into it or put it into their mouth, hindering their breathing.
Provide secure grounding.
● Connect the ground terminals of the UPS and the devices to be connected to the ground.
(Refer to "2. Installation and connection" on page 12.)
If a failure or leak occurs, it may cause an electric shock.
Touching the UPS and other devices without grounding at the same time may cause an elec-
tric shock.
● When you use the 3P-2P conversion Plug for the AC Input Plug, be sure to perform grounding
before connecting the AC Input Plug into a wall outlet (commercial power). On the other hand,
be sure to disconnect the AC Input Plug from a wall outlet (commercial power) before discon-
necting the grounding wire.
● Without grounding, the Power Line Surge Protection and the Network Line Surge Protection
do not work.
Connect the UPS to a wall outlet (commercial power) with a current capacity
larger than the maximum input current of the UPS.
● Otherwise, the power cord may be heated.
● When the equipment of the maximum capacity is connected, the current that flows is 8A for
the BU50XS, 10A for the BU70XS and 14A for the BU100XS.
Be sure to connect the AC Input Plug of the UPS to a wall outlet (commercial
power) of 100 VAC (50/60Hz).
● Connecting it to a wall outlet (commercial power) of a different voltage may cause a fire.
● The UPS may fail.
Caution
12